question

josh1e avatar image
josh1e asked

smart battery protect - remote + voltage sense?

Hi. I have just installed the smart battery protect (200A) and have it sensing battery voltage. I've used Bluetooth to configure the voltage shutoff and reconnect successfully. For my use case, I would like to use BOTH voltage sensing and the H remote on. Please can you confirm if this is possible (to use both at the same time?) or, does using one cancel the other? I've read conflicting advice while searching for information. thanks

Battery Protect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You can use both.

But it will act like an AND-gate, both signals (remote and the "ON-voltage") have to be ON for the output to be ON.
If one of the signals is OFF the output will be OFF.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

josh1e avatar image
josh1e answered ·

fantastic, thank you

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.