This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Semi regularly (I can't reliably replicate because I don't know the cause, but roughly every couple of days) I note that the GX is not displaying the expected display, and is instead in an unknown state. A quick reboot of the GX fixes this, but... Any ideas why it is happening?
Try chaining the cable between your GX device and the inverter. That state is shown usually when disconnected .
@Ksmith31 Do you have a Mk3 device and VE Configure running?
When that happens, remote console gives the message "blocked". Same thing??
