question

keno-van-veldhuizen avatar image
keno-van-veldhuizen asked

Can i get the data of my charger on my raspberry pi os.

i am using a rpi as my controllor for my system. i want to proces the data the charger is giving.

like the charging current and voltage. and the current charging state.
i am using the blue smart charger.

do i need to use venus or is there a different way.

chargerRaspberry PiBluetooth
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
elvis avatar image
elvis answered ·

MODBUS and or MQTT will help get the data realtime.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Chargers.

Additional resources still need to be added for this topic

VictronConnect bluetooth troubleshooting guide