Hi Team,
I have a Multiplus 2 installed with a Venus GX and BYD LVL 15.4kwh battery. I am using the programmable relay on the venus to start/stop the generator. I would like to use anther relay to control a load once the batteries are full. I have a two additional programmable relay available to me. One on the MPPT charge controller and one AUX on the Multiplus. The problem I have is that neither the charge controller or the Multiplus can see the state of charge once connected to the BYD battery systems. I have successful used these relays on lead acid systems but can seem to get them to see SOC once connected to the BYD Battery.