question

jneuhalfen avatar image
jneuhalfen asked

Victron Connect firmware 2.19 fails on multiple mppt controllers

I have a MPPT 75/15 and a mppt 100/30 solar controllers, today was prompted to update victron connect firmware to 2.19 from 2.14. Both Failed at 86%, response timeout. The 100/30 lost its firmware version, the 75/15 retained the 2.14 but will not let me connect until firmware is updated. I tried multiple times on both with the same result each time.

firmware update
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

matbtz avatar image matbtz commented ·

I have make the uptdate of mys mppt 75/15 today and now my controller is stuck on the booting page !

0 Likes 0 ·
2 Answers
jneuhalfen avatar image
jneuhalfen answered ·

Android did an update on my S8 this week. Was able to update both devices on first attempt after update.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Jaco Reinecke avatar image
Jaco Reinecke answered ·

Are you using a VE.Direct cable with VictronConnect?

If not, it is something to consider.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic