question

alexr avatar image
alexr asked

EasyPlus 12/1600/70 with LiPoFe4

Hi, can the EasyPlus 12/1600/70 inverter/charger be used with non-Victron LiPoFe4 batteries?

I'm planing to use the Winston LiPoFe4 cells with the REC-BMS.

Thanks a lot in advance!

Lithium BatteryEasyPlus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

@AlexR sure, why not.

Just make sure the multi is programmed for your battery voltages.

And your BMS is effective in protecting your cells.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

alexr avatar image
alexr answered ·

Perfect, thanks :-)

Does it mean, that the EasyPlus is in its configuration possibilities identical with the MultiPlus? I see in the MultiPlus docs the additional info: "Lithium Ion battery compatible"

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

@AlexR the Easysolar is essentially a multiplus with the addition of a small ac switchboard.

Have a look at the Victron Connect / VE Bus manual for config details.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?