I have a complete Victron battery monitoring/charging system on a sailing vessel. This all works great. One of the key reasons I standardised on Victron, was the logging ability of the CCGX; it far exceeded any other product. Especially the ability to perform offline logging for months, and then upload later to the VRM portal (which itself is really good for analysis).
I have a number of other voltages and currents that I would also like to log in the same fashion. I do that now with independent units from Madgetech. However, it would be much better to consolidate all those data points in the CCGX logging.
I know I can hook up to five BMV units to the CCGX, and those will all be logged. But they are real overkill, both from a cost perspective, panel real estate, and potential user confusion in the CCGX interface.
Are there any other options available that exist, or mechanisms that people have come up with?
Thanks,
Allan.