question

taylor-wagenaar avatar image
taylor-wagenaar asked

Multiplus 2 not showing utility/grid usage

I have 3 x Multiplus 2 inverters set up in 3 phase configuation. System has been running perfectly until last night.

As of 3am this morning , the phase 2 master shows no watts or amp draw. It is see 246V on line and still outputs power on and off grid. I suspect the CT for the grid side in the inverter is faulty.
Anyone else with this issue?

1700911071268.png

Multiplus-IIfault
1700911071268.png (90.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
gazza avatar image
gazza answered ·

There is not really a lot that can go wrong in them (CT clamp) unless subjected to abusive current... in which case you would know about it due to molten plastic. Have you checked that the cable is not damaged and the connections are solid and secure?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Faults with Victron equipment are best discussed directly with your dealer - this can be formalised with this support request form.

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes