Good afternoon,
I have carried out a battery installation at home with 3 Victron Multiplus inverters in parallel.
My house works with an automation system called Loxone (some may know it). I have connected the Cerbo GX using Modubus TCP and I can read all the information I need, but I need help sending the solar production information to the Victron system.
Solar production is done using micro inverters and I currently have a meter (Eastron SDM230) to measure solar production. I already have that information in my Loxone system and I need to send it to Victron so that they know the production data.
I have not been able to obtain the modbus module and address information to write this information.
Does anyone know this information?
Thank you so much!
