question

mintu-ghosh avatar image
mintu-ghosh asked

Enabling Battery Monitoring Function

Hi, I need to enable "Battery Monitoring" function in the General Tab of VEConfigure. I need to know;

a) "State of Charge when bulk finish" - its meaning and optimum setting point

b) "Battery Capacity" - what battery rating should be put, e.g. C1, C10, C20,,,,,,,

c) "Charge Efficiency" - What should be the optimum setting for it

Thanks.

SOC
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

clive avatar image clive commented ·

In case it makes a difference ...this system is all victron MPPT 250/100 with 5000Va inverter and colour GX feeding a 48V 900AHr Opzv (non victron) battery bank

0 Likes 0 ·
Peter Silbernagl avatar image Peter Silbernagl commented ·

Mintu Ghosh,

Did you ever get answers to your questions a) and c)?

Rgds,

Peter

0 Likes 0 ·
1 Answer
wkirby avatar image
wkirby answered ·

You'll need to consult the datasheet from your battery manufacturer to obtain those details.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic