I have just got 3 X Victron 150A Smart Lithium batteries. I was advised to initially pre charge them with a Blue smart 12V/15A charger, set to lithium and charging at (4 amps not 2 edited) amps. Charging the first battery, went fine and ended with 13,44V and all cells at 3,36V stating "Ready for use". The next battery got to 14,06V and stated "Busy, charging disabled" and cell voltage at 3.90V 3.38V 3.37V 3.41V. After removing the charger, all cells next morning was on 3.32V and stated "Ready for use".....The last battery done just about the same as number 2............What am i doing wrong or is the 2 out of 3 batteries faulty?