Hi,
I'm running a 3 phase ESS system with two EEL / Seplos BMS Boxes attached through BMS CAN (link between both boxes is RS-485). Functions are all OK and via CAN I see the combination of both batteries. The remote displays Max/Min Cell Temp and Voltage and give a hint in which pack this happens, but unfortunately not the cell ID. The CAN protocol should provide this information, but the resulting string end with an hash tag which normally would be followed by the ID of the cell in this pack. As MQTT as other data sources show the same information and it it available on CAN bus, the transfer CAN Bus to DBUS in Cerbo might fail in the CAN-BMS driver. Does somebody has some thought about this ?
Many thanks in Advance,
Michel