This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
i have ordered for test both Smart Battery Protect and Battery Protect. Accroding to manual on webiste both should be able to be controlled by minus of battery conneted to "L" of the remote input. It works like that on Smart one, but standard one don't have L/H options. Are there any diffrent revisions of those devices?
Unfortunately, the documentation is misleading. We apologize for this and will correct the documentation asap.
The non-smart BatteryProtect does not have an L pin, respectively the second pin has no function. The pin labelled as REMOTE is the H pin and can be either shorted to the other pin or connected to the battery.
I hope this helps.
