question

Chris avatar image
Chris asked

Pylontech US2000C and Venus 3.11 compatibility? - Device not listed

Are there any known compatibility issues between Victron Venus OS V3.11 and US2000C batteries?

We commissioned a system yesterday,

The Victron controller (Multiplus II GX) appears to be seeing Canbus data packets - no errors / dropped packet.

But he Pylontech batteries (2x US2000C) are not being recognised by the Victron controller. Being listed as a device

1698507700158.png


both TX & RX are counting up.(Annoyingly this image dropped from original post)

Victron Type A Canbus cable is fitted

PylontechVenus GX - VGX
1698495139855.png (16.4 KiB)
1698507700158.png (37.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
nickdb avatar image
nickdb answered ·

No. Should work fine with the correct cable. Sometimes restarting the batteries helps, powering the master first.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

Try power off and reset the batteries. Pylon also want one of the pins that is connected on a victron cable disconnected, check their pinouts carefully, some people have had a problem with this.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image
ejrossouw answered ·

Also try swapping the cable around as in connect battery side to GX.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.