This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello!
I have (currently) 2 Pylon US2000 in use and want get assure, that the configuration within VEConfigure is correct. So i would appreciate if you could confirm the settings.
I have had a defect US2000 about 1 year ago which was bloated with overvoltage warning in 1 cell. But all 3 packs bloated... so I'm want to get sure that the settings are 100% correct.
THANK YOU!
See picture below:
That all looks correct.
Do you have the Comms cable into the GX so that DVCC can also make sure the combined solar and grid charge does not exceed the battery max continuous?
There is no solar directly connected. Loading just over grid, so that should be no problem.
