2 MPPT's on same lynx distribution port

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Oct 23, 2023 at 01:19 PM by s1277 for the following reason: The question is answered, right answer was accepted

question

s1277 asked Oct 16, '23

can I put 2 MPPT's on same lynx distribution port assumes fuse is good

I do not have room for second lynx distribution in line

is there another solution if you cannot do this like cable the 2 distributions together or add a fuse block etc

lynx distributor

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-10-16T14:48:05Z

kevgermany answered · Oct 16, 2023 at 02:48 PM

It will work. Or connect to the red and black connectors at the end.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

s1277 commented · Oct 16, 2023 at 03:19 PM

I have my cerbo on the end

0 ·