question

bassman avatar image
bassman asked

VRM VE Bus State

Hi, We have a MP2, 240ah AGM Battery bank, CCGX and PV (Enphase) on the AC1 Out - it all seems to work well as a UPS with occasional light use.

The problem is that when we do use it the VRM VE Bus State widget doesn't show Inverter use, it shows all charging use - Bulk, Absorption, Float etc.

All the other widgets display correctly.

Any ideas?

Cheers.

ps: When the system was first commissioned the widget displayed properly and there were some changes made to VE configure by the installer.

remote consoleenphase
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Bassman

Is this solved already?
Your installer is the one to ask in this case :)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Remote Console on VRM - Troubleshooting

Additional resources still need to be added for this topic