Hi there,
my name is Robert, i'm from Austria and i'm new to this forum.
My setup so far:
- VictronEnergy Easy Solar II GX.
- 4680Wp; ~130V
- 66Ah Eremit batteries - 48V, integrated BMS per 12V block
- VictronEnergy Smartshunt 500A
- Greed feed in enabled (limited to 500W)
- EM540 grid-meter - all-phases compensating
Installation is new - about 4 weeks.
So i observe, that even if there is far enough Power from the panels available, the system tend to discharge the batteries, and adjusts the PV down to 0 Watts - despite full sun.
It does this for - say 10 seconds. After that it increases PV up to full power possible at observed moment, lets say 3000 Watt. This regulation cycles all the time, until sunset.
Why the system discharges the batteries, instead just use PV power?
Has anybody an explanation for that?
Thanks very much, br Robert.