Bluesmart is in Lion Mode. Battery reached 100% with 13.36V at the moment.
87.57Ah charged so far. not changing any more but the bluesmart keeps going on with 4Amps in Bulk mode.
Should I keep it plugged to the battery? how long?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Bluesmart is in Lion Mode. Battery reached 100% with 13.36V at the moment.
87.57Ah charged so far. not changing any more but the bluesmart keeps going on with 4Amps in Bulk mode.
Should I keep it plugged to the battery? how long?
Ensure that the absorption voltage is 50 - 100mV below the battery manufacturer's maximum.
@d0minik your Liontron battery wont be fully charged until it gets to 14.2v or so.
You can use the lithium preset in the BlueSmart 12-4 charger. It just needs more time to finish charging, esp if you have any loads connected.
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
40 People are following this question.