question

d0minik avatar image
d0minik asked

Victron Bluesmart 12/4 and Liontron LiFePo4 12/80Ah

Bluesmart is in Lion Mode. Battery reached 100% with 13.36V at the moment.

87.57Ah charged so far. not changing any more but the bluesmart keeps going on with 4Amps in Bulk mode.

Should I keep it plugged to the battery? how long?

chargerlifepo
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mike Dorsett avatar image Mike Dorsett commented ·
It would appear that you need to customise your battery voltage settings in the MPPT.

Ensure that the absorption voltage is 50 - 100mV below the battery manufacturer's maximum.


0 Likes 0 ·
d0minik avatar image d0minik Mike Dorsett commented ·
but there is no mppt
0 Likes 0 ·
1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

@d0minik your Liontron battery wont be fully charged until it gets to 14.2v or so.

You can use the lithium preset in the BlueSmart 12-4 charger. It just needs more time to finish charging, esp if you have any loads connected.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Chargers.

Additional resources still need to be added for this topic