hi there,
I'm facing some weird behaviour with an EV charging station and I hope to find a solution with your expertise.
First things first:
- Firmware v1.26
- all settings set to the defaults since it claims 'no support if modified'
- mode 'auto'
- Battery/grid power timeout (modbus register 5103) set to 30 min
- Allow battery/grid power for auto mode set to 1 - enabled
Problem 1:
[x: time | y: power in kW]
After 30 minutes of charging with major energy from battery, charging is stopped but immediately restarted. Seems to go on until the car rejects because of too many restarts or PV power is very low.
Problem 2:
[x: time | y: power in kW]
The only way is up. Charging power is beeing increased to the max possible (in my case 7.4 kW limited by the car) but never decreased. There are days when it's working just fine also with decreasing charging power when the PV power decreases. I can't find any pattern. At 10:08 I stopped manually.
Is this related to a bug or am I the problem, any thoughts?
Thanks! Simon