question

sub0 avatar image
sub0 asked

CerboGX stopped reporting to dashboard

Hi all,

New installation of Victron batteries, BMS and CerboGX. The CerboGX reported to the cloud dashboard for a few weeks and then stopped reporting. There's an alarm on the dashboard that says "Communication monitoring".

Internet connectivity onboard works fine.

Is this a common occurrence? Is it a matter of rebooting the CerboGX?

cerbo gxmonitoringdashboard
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·
Reboot. You can also set reboot on no contact to it sorts itself out.

And is it common? Depends on where the GX is interference can be an issue.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sub0 avatar image
sub0 answered ·

Rebooting solved it. Thanks!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document

Additional resources still need to be added for this topic