After updating the EV Charging Station to the latest firmware (v1.26), I am unable to get it to stop draining my home battery's when charging my EV.
I've tried about every option available with the "Start charging at backup battery SoC(%)" and "Stop charging at backup battery SoC, if Off Grid(%)".
I've even set the "Battery/grid power timeout(min)" to 5 min (can not be set lower), but till no with no luck.
The only thing I can think of I'm doing wrong is that the charge mode is set to "manual", but I'm sure that this was working fine with the old firmware.
Am I missing something here?