question

actionmendes avatar image
actionmendes asked

Cyrix-ct 230 continuously blinking on a super agm battery bank

Hi.. I've installed the Cyrix ct 230 on my sprinter van to charge my 170 super agm battery from a 95ah battery and a 180ah alternator.

I've followed the diagram and everything is nicely installed but the cyrix doesn't stop blinking regardless if the van is working or not.

As I bought it on Amazon I've returned the first cyrix that I bought thinking that it was a problem with the module but after installing this second unit,I still have the same problem.

Could it be because I've got the cyrix module and second battery on the rear of the vehicle about 3 to 4 meters from the main battery?


cheers

Cyrix Battery Combiner
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @actionmendes

What is the blinking code?

LED on: engaged

LED 10 s flash: disengaged

LED 2 s flash: connecting

LED 2 s blink: disconnecting

LED 0,25 s blink: alarm (over temperature; voltage > 16 V; both batteries < 10 V; one battery < 2 V) (multiply by two for 24 V)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.