Hello,
Need help with my AC current Sensor.
it was installed on my old SMA and the values are allways above, in average 200w.
I know that the values are inaccurate is that I have installed a shelly and is the values showed are the same as the SMA.
I have a Multiplus II 48/5000, Raspberry with Venus OS 3.10, with usb Mk3 connected to the multi.
1. Dip switch were checked.
2. Diferent Wire Gauge.
3. Tried AUX 1, 2 and TEMP connector.
4. Several days have passed for the auto calibration.
5. Reinstalled the assistant.
Any recomendations?