What wire gauge is the eyelet connector packaged with the Blue Smart IP65 Charger?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Oct 17, 2023 at 08:37 PM by Justin Cook for the following reason: The question is answered, right answer was accepted

question

jfeiman asked Dec 6, '18

Blue Smart Charger

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Margreet Leeftink (Victron Energy Staff) answered · Dec 10, 2018 at 04:27 AM

The eyelet is an M8 eyelet

The wire gauge of a 12/7 Blue Power is 14 AWG = 2.08 mm2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2018-12-10T20:04:01Z

jfeiman answered · Dec 10, 2018 at 08:04 PM

I also asked this question through the main Victron website and got 12 AWG for the answer...

Hello,

This is 4mm2

Best regards

Met vriendelijke groet

Johannes Boonstra

Logo_Victron_Energy (CS4)

I guess I'll find out for sure when I cut it to add an inline fuse.

1544471943461.jpeg (3.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2018-12-10T20:56:44Z

Guy Stewart (Victron Community Manager) answered · Dec 10, 2018 at 08:56 PM

It’s possible that they are both right and it may vary on manufacturing run and temperature rating of the wire.

If you use a 20A fuse you should be fine either way. That would be suitable and covers both cases.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.