question

schattenheld avatar image
schattenheld asked

MultiPlus II GX: relay does not appear in RemoteConsole

Hi there,

I cannot find the relay-control in remote console. Even if I set an assistent via VEConfig it is not shown.

Any ideas how to implement this?


setup: MultiPlus II 48/3000 GX

firmware: 3.1

image: Large OS


Thanks in advance

Schattenheld

screenshot-2023-09-28-143948.png

Relayremote console
screenshot-2023-09-28-143948.png (33.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

The relay of the MultiPlus can't be controlled from the VRM portal.

Das Relais vom MultiPlus kann nicht über das VRM Portal geschaltet werden.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Remote Console on VRM - Troubleshooting

Additional resources still need to be added for this topic