Has anyone used the Blue Smart Charger IP67 to charge the Torqeedo 26-104 battery?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

mspelt asked Jul 6, '19

charger

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-07-06T22:12:05Z

Daniël Boekel (Victron Energy Staff) answered · Jul 06, 2019 at 10:12 PM

This should not be a problem, this battery has a 'normal' voltage to be charged, and disconnects itself if there is a problem.

4

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mspelt commented · Jul 07, 2019 at 12:20 PM

Can this chargers algorithm be modified to 29.05 max voltage?

0 ·

Daniël Boekel (Victron Energy Staff) ♦♦ mspelt commented · Jul 07, 2019 at 12:39 PM

At the moment only 28.8 or 29.4 volt is possible.

or l-ion setting: 27.4V.

So I have to come back on my previous message: yes you can use it, but not to optimally charge it.

0 ·

mspelt Daniël Boekel (Victron Energy Staff) ♦♦ commented · Jul 07, 2019 at 02:25 PM

You say not at the moment, does this mean that possibly the algorithm could be modified in a future firmware update?

0 ·

Daniël Boekel (Victron Energy Staff) ♦♦ mspelt commented · Jul 07, 2019 at 03:04 PM

Yes, there are plans, but there is no date for that.

For now, the Phoenix smart chargers are your best bet:

0 ·