question

Guus van Veen avatar image
Guus van Veen asked

Mppt 100/50 doesn't charge in bulk

screenshot-20230925-090015.jpgscreenshot-20230925-090044-pylontech-auto.jpgscreenshot-20230925-085922.jpg
Battery states that max current was 14,20 v every day but I'm not able to measure this voltage anywhere else.screenshot-20230925-090044-pylontech-auto.jpg

MPPT SmartSolarsolarsmart solar charging behaviour
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Guus van Veen avatar image
Guus van Veen answered ·

Running the battery on the car engine we are able to fill up the batteries but on solar it is doing nothing

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image
klim8skeptic answered ·

@Guus van Veen you should look at the fuse / breaker between the mppt and battery, as a min battery voltage of 0.01v would suggest a disconnected battery.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guus van Veen avatar image
Guus van Veen answered ·

Update: most likely the charger doesn't charge because it misreads the battery charge. This is caused by the fact the current isn't flowing probably between charger out put and batteries. caused by to much resistance in the cable or fuse or connection, causing the voltage to be high on the charger output's while being low on the battery side.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic