This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
Maybe I should feel dumb OR victron is like "apple intuitive" OR victron doesn't care about customers but I am wasting my time accessing & configuring easysolar 2. Even chinese stuff is more practical, and got a starting manual..
Anyway, How to configure US5000 SoC with easysolar2 in PV OFFGRID system ? With or without ESS ? Any manual wandering around ?
ALOHA, thanks, Greg
Starting with the training and guide is the place to start.
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
The system is not supposed to be apple intuitive.
It is not a consumer product, is incredibly flexible with many features which requires knowledge and training to install.
Anyone who has followed the free training on the professional site will cope.
It isn’t rocket science but you do need to put the effort in or hire someone that has.
OK, Thanks for providing company guidance. In my country it's mandatory to provide a manual. But the only A##Holes who deviates from the rule are digital techs..
On "Pylontech compatibility" page the good info is in :
this link is useless for eaysolarII: "https://www.victronenergy.com/live/" which it's not the direct link to how to access to VEConfigure: https://productimageserver.com/literature/ownersManual/82950OM.pdf
After following this, I guess the only solution to configure an "EASY"solar II is to buy a new MK3 stuff_convertissor to connect to RJ45 port ?
Well I was joking about apple politic but..
