I've got an Rpi 3 B+ running the 2.30~45 version of the Venus OS installed from the development images. It has two devices connected to it via VE.Direct to USB adapters, device 1 is an MPPT 150/85 rev.2, and the other is a BMV-712. Everything worked great for several months, but then on June 28th around 7am PST, it stopped displaying the information from the BMV-712. I've tried to unplug the USB adapter and plug it back in, and I've rebooted it several times both with the devices plugged in and without. If I run 'lsusb -v', (attached) it shows the BMV connected, but it no longer shows in the console or in the VRM portal.
I also updated to 2.32~2 thinking that maybe it would reset whatever is wrong, but it did not fix the problem. Can you think of anything else that I can try? If doing a reformat and re-install would fix it, I'm open to that, too. Thank you for any help or ideas that you can provide.