question

Beau Sandford avatar image
Beau Sandford asked

Stopping generator after fault

Hey,

Got a setup with a CCGX and Multiplus 5000/70/48 on a 7KVA diesel generator. I've been having some issues with the RCD in the generator tripping when the Multiplus goes to put a load on it after an autostart. I assume this was to do with the ground relay which I've now disabled, however with this I noticed an odd problem... The CCGX, will realise the generator hasn't started providing power and provides the subsequent alarm, however continues to call for the generator. In my case this meant the generator ran for an hour before I noticed it was running without load.

Are there any settings that may turn off the generator after the CCGX alarms from the generator not being present? I haven't seen anything so far.


Cheers,

Beau.

MultiPlus Quattro Inverter ChargerCCGX Color ControlGenerator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Beau Sandford, no there is no such setting.

I’ll keep it in mind for future developments though. Good weekend, Matthijs

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.