question

takamine avatar image
takamine asked

Two relays on the BMV712 ...

Is it possible to connect 2 BMV712 clocks to 1 shunt with a splitter ? The idea is to have 2 relay options?

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mike Dorsett avatar image
Mike Dorsett answered ·

You should be able to connect 2 BMV's to one shunt directly.

The Shunt is a very low impedance source (typ 5mOhms or less), so can drive quite a few loads without loosing accuracy...


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Justin Cook avatar image
Justin Cook answered ·

Connection of two displays to a single shunt is certainly not supported, but would be an interesting experiment!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.