This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
TW6000-PRO Manual.pdfI use the Litech TW 6000 pro Lifepo4 Accu, unfortunately I did not succeed in creating a communication between the Cerbo and theBMS from the 6000 pro. But it has to work, because I have already seen systems with the Cerbo and the Litech Powerwall.In the video is not my system, but the same components in use.Maybe someone can give me a hint what I'm doing wrong, I've tried it with VE Cann, and BMS Cann, but without success. Lg Josef
Do you use a BMS-Can Type A cable?
https://www.victronenergy.com/live/battery_compatibility:can-bus_bms-cable#type_a
Ja habe ich verwendet
Please post a screenshot of this remote console/GUI pages while the battery is connected via CAN:
Device List (Menu)
Device List (Menu) -> Settings -> Services -> VE.Can port
Device List (Menu) -> Settings -> Services -> VE.Can port -> Network status
Please also post a picture of the cable connected to the Cerbo and a picture of the cable connected to the battery.
