Hello everyone,
I have a problem that recently occurred with my DC DC charging boosters
Both charging boosters no longer deliver electricity to the consumer batteries. The app says “Remote Entry Inactive”
Of course you just google it and I also found this postVictron charging booster “external input inactive” | TX board - the T5 / T6 / Multivan forum
But he couldn't help me because I didn't have this error.I didn't install the system myself, but had a company do it for me, but it's too far to drive there again. What I did myself is to lay a VE – direct cable from the MPPT to the Cerbro and then I noticed the “error”. Maybe a coincidence but maybe there is a connection. Before I laid the cable, I couldn't see on the display how much the solar system was producing. Only after the cable was plugged in could you see what the PV system was producing on the Cerbro display.The whole system is installed on a yachtHere are the specifications. Maybe these will help
The components are ALL from Victron
2 x Lipo 4 batteries as consumer batteries with 660 Ah
Quadro 5000 as charger + inverter
Lynx Smart BMS
Cerbo
MPPT 150 / 70 TR
2 X DC DC Orion 12V 30A
Lynx Distributor
