question

Matt drummond bell avatar image
Matt drummond bell asked

What is the access code for Fronius to change the grid setting?

Hi all does anyone know the access codes for Fronius ig 3 plus ?

I have just got hold of one and need to change grid settings to mg50

I also have a Later datamanger 2 card for sale as it isn’t compatible with this model any takers? Any one got an ig plus compatible card?

installation
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matt drummond bell avatar image Matt drummond bell commented ·

So I spoke to Fronius they said that it should have the mg50/60 setting but it doesn’t it has the higher firmware than stated in the victron guide, has anyone else had this problem? Cheers

0 Likes 0 ·
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Max,

It is of course best to contact Fronius for this information.

These codes must be kept out of public for standards compliance and safety reasons to prevent unqualified end users from making mistakes with grid connected equipment.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matt drummond bell avatar image Matt drummond bell commented ·

Yep completely get the reasons why, but for somebody writing on a victron community about an inverter that is ac coupling with victron....

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic