Hello,
I'm using the Victron Charging Station with the newest firmware 1.26 and Cebro GX 3.01
I set "Start charging at backup battery SoC(%):" to 90% and Stop-SOC to 50% and Allow battery/grid power for auto mode is allowed.
In automatic mode charging the car-battery starts at 91% und stops when SOC of the house-battery reaches 90%, then the house-battery is loaded to 91% and charging the car-battery starts until the house-battery reaches 90% and so on...
In my understanding charging should stop at 50% in order to avoid start-stop-sequences all the time...
Furthermore, my Tesla Model 3 (2020) doesn't continue charging when die SOC of the house-battery went below 90%. With a Smart it works fine...
Any ideas?
Best regards
Stefan