question

Thomas avatar image
Thomas asked

Led ind. Lights black Multiplus Ii

Bought two Multiplus II 48/5000/70 One of them does not show any ledlights, panel is black, but the inverter seems to work, 234V/50Hz I can not find if there is any input to make the led lights to light up in the manual. Did I miss something?20230906-144834.jpg

Multiplus-IIled
20230906-144834.jpg (5.5 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Maybe the ribbon cable to the LED PCB is loose. Open the cover and check that.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas avatar image Thomas commented ·

1694111841683.png

Thomas answered · 3 secs ago


You were right, the cable shoe to the led light had come loose inside the inverter. It works OK now thanks!

0 Likes 0 ·
1694111841683.png (1.7 KiB)
Thomas avatar image
Thomas answered ·

I will check, thanks!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas avatar image
Thomas answered ·

You were right, the cable shoe to the led light had come loose inside the inverter. It works OK now thanks!

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hans Dahlgren avatar image Hans Dahlgren commented ·
Had the same problem - same solution


Thanks for posting!

0 Likes 0 ·

Related Resources

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes

Additional resources still need to be added for this topic