This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi everyone,
it seems to me there is a bug in the temperature probe in the v3.01 for Cerbo GX. I just updated yesterday to this version, and I got a temp. alarm for my freezer, which usually runs at -20C/-22C since I have it, and now it is displaying -25C / -27C. It is the Victron sensor, and nothing has changed in my configuration.
Please find 2 pictures :
FireShot Capture 042 - OffGrid 4.5kWp 24V OPsZ 1000 C10 - VRM Portal - vrm.victronenergy.com.png
@MichelG According to the release notes, the temp meaurement range has been expanded to -40c.
v3.01 – July 17th 2023
Changes:
Fix issue in CAN-Bus timing for Ekranos
Fix bug where a network issue could cause the real time connection to VRM (MQTT) to be lost, until rebooted.
Fix Modbus-TCP bug, causing VE.Bus Inverter/state, register 31, to show External control state.
Increase measured temperature range by temperature inputs on Venus GX, Cerbo GX and Ekrano GX to minus -40 °C
Add missing translations.
Add support for Pylontech Pelio-L battery: SVS off, STS off, DVCC on.
Fix bug causing approx 70 EasySolar-II GXes and/or MultiPlus-II GXes to not have a uniue VRM Portal ID, and therefore failing to be registered on the VRM Portal.
Multi and Inverter RS: Fix battery power reading missing or be wrong when Multi-RS or Inverter-RS is used as battery monitor.
Fix CAN-Bus timing issue for RaspberryPi HATs using the MCP2518 chipset.
