Hi all,
is there any way to monitor the state of the aux/alarm relay of a Multi? I was not able to find anything in dbus or in the modbus registers.
Cheers, luphi
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
is there any way to monitor the state of the aux/alarm relay of a Multi? I was not able to find anything in dbus or in the modbus registers.
Cheers, luphi
You could connect the alarm relay to a digital input of the gx device and set the digital input as an alarm.
Additional resources still need to be added for this topic
38 People are following this question.