I use a Victron EV charging station. But I have a problem with displaying the charging power in W. For one specified charging current, I can set the Power Calibration coefficient (for example 6A ... 0,85). But when I need to manually change the current value for example 10A, 12A or 16A, I would have to enter a different Power Calibration value. Would it not be possible to add the option of more different Power Calibration values (for 6A, 8A, 10A, 14A, 16A)? Then the displayed charging power value would be correct for different charging currents after the change in VRM.
Or don't you have another idea?
Thanks,
Zdenek
