Working on a system with: Cerbo GX, MultiPlus 48/3000/35, two BlueSolar Charger MPPT 150/35 and a Pylontech US5000.
Everything seems to work, except for the Pylontech, not showing up in the Cerbo GX. Everything else (MultiPlus and the two MPPT's show themselves in the "home-screen" of the Cerbo GX.
I use the type A cable (which I tested on a cable tester to check if the pins are connected ok and they are) which is plugged in in the CAN-port of the Pylontech and the BMS-Can-port in the Cerbo GX. In the other opening of the BMS-Can I put a terminator.
I also tried switching to the VE-Can port (which I set to 500bps), but also in that setup, the battery doesn't show up :-(
After every change, I rebooted the Cerbo GX.
Anyone got any suggestions?