I want to be able to disconnect the AC in on my quattro when the battery is charged enough to support the load. it is a 15kva quattro with 38.4kw of useable lithium,
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I want to be able to disconnect the AC in on my quattro when the battery is charged enough to support the load. it is a 15kva quattro with 38.4kw of useable lithium,
This functionality is available.
If you are using VEConfigure:
https://docs.victronenergy.com/veconfigure.html#ignoring-ac-input-with-virtual-switch
If you are using the VE.Bus enabled version of VictronConnect:
https://docs.victronenergy.com/victronconnect-vebus.html#ac-input-control
Hu Guy
Thanks for the reply. What I failed to mention was I am running ESS assistant.
Then you can use assistants for the same functionality.
The easiest option is described here:
https://www.victronenergy.com/live/assistants:ignore_ac_input_using_the_generator_assistant
Hi Guy
I have this working but want to be able to connect the ac in when the battery is at 100% so I can export but have it disconnected between 30and 99%. The assistants work on an or basis which means I can do both. Can you help please.
Hi Guy
I have installed an additional Quattro running in parallel. When I try and run the PV inverter support it will not let me with ESS and if I don’t us it the fronius inverterS don't come online, any ideas please.
Additional resources still need to be added for this topic
MultiPlus Product page / Quattro Product page
MultiPlus 230V Manual / Quattro 230V Manual
8 People are following this question.