Hi guys and ladies
We have the following hooked up to a raspberry pi ( our sweet sanctuary on vrm )
x2 blue solar regulator 100/50 hooked straight in via usb
1x smart solar regulator 100/50 hooked straight in via usb
1x 712 bmv again hooked up via usb
1x multi plus 3000 VA via mk3 usb
They work perfectly in regards to online and communication (which was supprisingly simple to do).
But we have noticed the smart solar is always on absorption (for about an hour ) when the other two are on float.... the only difference I can see is that the bmv and smart are commincating via bluetooh (which I can not do with the other two as they cannot have Bluetooth leads in as well as the cables to the raspberry pi)
Is there some way to network these devices using the pi (vensux gx )
any help would be much appreciated