I have Cerbo GX installed on boat. There is now firmware version 3.01 Large with node-red.
After each reboot or power failure it loses all configurations and I have to make all configurations again and upload node-red flow, because it is also lost.
Firmware upgrade from 2.9 Large to 3.01 Large does not helped.
Factory reset ( venus-data.tgz ) does not helped.
SSH connection show me, that data partition is empty, so the problem described in another post is not the case.
root@einstein:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 981568 864500 46580 95% / devtmpfs 465376 4 465372 0% /dev tmpfs 515040 912 514128 0% /run tmpfs 515040 808 514232 0% /var/volatile /dev/mmcblk1p5 1134336 4564 1054100 0% /data /dev/mmcblk0p1 15691776 192 15691584 0% /run/media/mmcblk0p1 tmpfs 515040 912 514128 0% /service overlay 515040 808 514232 0% /var/lib root@einstein:~#
Can you give me some hint, what I have to do? Thank you very much.
