The CCGX has worked well for about a year working in a marine environment.
I have 4 liquid tank senders (3 water tanks and 1 diesel tank) that are connected to the CAN network through Navico 000-11518-001.
The 3 water tanks used to display on the CCGX and VRM portal, though it never displayed the fuel tank level.
All the tanks display on the boats MFD displays ( B&G Zeus2 running 16.3 release 2)
A couple of weeks ago I had the opportunity to calibrate the fuel tank sender which I had never done before.
After the calibration the CCGX stopped reporting the water tank fluid levels, but the other displays still report all 4 tank levels.
All the other monitoring sees to still work.
The CCGX sees the three water sensors on the CAN network. And nothing thinks there are any CAN bus problems.
I have restarted everything, and done just about everything I can think of to get the sensors back on the logging system - but to no avail.
I would happily take any suggestions.
Brian