Hello everyone my multiplus only loads with 2 amps. The MPPT charge controller loads with full power. I don't know why it is.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello everyone my multiplus only loads with 2 amps. The MPPT charge controller loads with full power. I don't know why it is.
Missing Pictures
Additional resources still need to be added for this topic
37 People are following this question.
2 x Multiplus 2 48/3000 (parallel on phase 1) in ESS: grid setpoint not reached
Why my battery does not load ? Please have a look ...
3rd Phase feed in current following 3rd Phase Critical loads current.
Setting negative grid setpoint limited to 80W feed in
Fine tuning - Grid connected system still importing power from the grid