question

Jamie Greenaway avatar image
Jamie Greenaway asked

Using CT clamp with generator

My generator is not connected to my multiplus II, it is totally separate and powers a stand alone battery charger, although my CCGX does send the on signal to the generator for low battery percentage etc.


Is it possible to still monitor the generators AC output via the Victron CT clamp around the generators output even know its not connect to any AC inputs on the multiplus?


The DC side is monitored via a smart shunt, but being able to see AC consumption of the standalone charger would be nice too.

Thanks.

Generatormonitoringct clamp
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic

MultiPlus Generator FAQ

GX - Generator auto start/stop

Automatic Generator start/stop

 Hybrid Generators

Virtual switch - Generator start/stop

Additional resources still need to be added for this topic