This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good day
I have 3 site with the same issue,
When you look on the inverter on device list, it for example says, 230V and 0.8A but showing 1500W
The other site, we have limited the input done all relevant settings, but the unit keeps pulling up to 42A and then tripping his main breaker,
Is there a known issue on the quattro's?
Regards
no known issue - usually its a setup issue, also make sure that the cerbo and inverters are on the latest fw as well. plus are you running any non orginal cerbo software .
