question

dozzerfolly avatar image
dozzerfolly asked

Victron smart shunt

Hi all, I recently purchased a Victron smart shunt and had it fitted by my local 12v company, when I looked at it when I got home I can see the red power cable has been connected to the leisure battery terminal of the split charge relay because it was closer rather than the positive terminal of the battery , the negative side of the shunt is all correct, will this affect the voltage readings?

SmartShunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

smart shunt actually should have 2 voltage inputs - one for the starter and one for the leisure battery. If only the leisure battery has been wired, then you will only see the voltage from that battery.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.